home | about us | products | services |  faq  | contact

 

Indoor Radio Fence Frequently Asked Questions:

 

 


 
Q - Can I use it to keep my dog off furniture? A - Yes, this is one of the most common uses.
   
Q - What is the dummy collar effect?
 		 A - This is a procedure where the collar is eliminated as a factor in learning. In other words, the dog wears the collar without it being activated for 3-5 days. This way the dog does not learn that the collar causes the correction, but rather getting to close to the yard boundary.
 
   
Q - Can I move it from location to location? A - Yes, but be sure that the dog has learned to avoid one area before moving to another area.
Q - How long should an owner take to create the dummy collar effect?
 		 A - Three to seven days.
   
Q - How many days should the dog wear a deactivated collar before receiving the correction for the first time? A - Three to seven days.
   
Q - The first time the dog receives the correction should he be on or off a leash? A - On the leash so that you can guide him to the appropriate behavior.
   
Q - What is the purpose of having the dog on a leash the first time he receives the correction? A - So, if need be, to guide him to the appropriate behavior.
   
Q - What is meant by the "safe zone"?
 		 A - The area that the dog can be in without receiving a correction.
   
Q - Does the correction cause pain or harm to my dog? A - Absolutely not. The correction is safe, painless and humane.
   
Q - Is this a humane way to train a dog?
 		 A - Yes, it is very humane and effective.
Technical Frequently Asked Questions:
Q - How big is the transmitter? A - 12 inches in diameter.
Q - Will the signal work through walls? A - Yes, but the range may be reduced.
Q - Will this unit harm my family with pace makers? A - Contact the manufacture of the pacemaker, and let them know we are using a 10.65KHz signal.
Q - How can I get the transmitter to block off more than one door? A - If the door is within range, you may turn the signal up. Otherwise you may need different transmitters.
Q - Do I have to keep the transmitter away from metal?
 		 A - No, but the signal may be effected by the metal.

If you have any other concerns or questions please feel free to Contact Us!!